Haida Instrument Analysis Carton Factory Paper Inspection

The carton factory shall carry out the inspection of the purchased base paper according to the requirements for the implementation of the base paper procurement plan, so as to confirm whether the quantity and quality thereof comply with the stipulations. The first purpose of the inspection is to prevent substandard papers from entering the factory, minimize the losses caused by the original paper during production, and secondly, check and understand the performance of the base paper to make a correct choice, minimize the cost and ensure the quality of the finished product.

The inspection of the base paper follows the following process:

The first is to verify whether the delivery code is the same as the purchase plan and whether the arrival quantity is the same as the delivery code. The type, labeling quantity, specifications, and number of pieces of the base paper can be confirmed on the spot. The weight can be weighed by the division scale, and the deviation must be controlled within ±3 inches (three-thousandths of a millimeter). Deficiency should be deducted.

Second, check whether the label of the roll paper is clear, whether the packaging is defaced, and whether the base paper is damaged or damp. If it is damaged or damp, it should be deducted. The specific method is as follows: If damage or moisture occurs on the side of the roll paper, count from the outside to the inside without damage and moisture, for example, N = 32 layers (the 33rd layer is not damaged, damp), and then measure The distance from the 16th floor to the axis D , for example, D=0.55m , combined with the size L of the roll paper (unit: meters) and the basis weight G (unit: g / m2 ), the weight to be deducted is W = 10- 3G x L x ( 2 x 3.14 x D ) x N (unit: kilograms). If damage or moisture occurs on the end face of the roll paper, it is generally not allowed to exceed 2 cm, otherwise it will be handled as a return.

Third, check whether there is a sign on the end surface of the roll paper joint, whether the end surface of the roll paper is flush with the shaft core, whether the core of the roll paper core has a core phenomenon, whether the two end surfaces of the roll paper have the same diameter, and the rewinder is tight. Degree and whether the two ends are elastic, whether the binding of the roll paper meets the standard, whether there is a color difference in the batch of rolls, and so on.

Fourth, check the moisture content of the roll paper with a pin-type moisture meter. Sampling according to GB13024-2003 and GB13023-1997 . The test was performed on both ends of the roll paper, and three reference points were evenly taken. The depth of insertion was not less than 0.6 cm. Take the average of the six points tested as the moisture content of the roll paper. In the raw paper supply contract, the delivery moisture is generally specified, for example ( 8.0 ± 2.0 ) % . The tested roll paper moisture content is qualified within the scope of delivery moisture, otherwise it is treated according to the agreement of both parties, and the excess water must generally be deducted. The specific method is as follows: If the moisture content of the roll paper M1 exceeds the upper limit of delivery moisture Ma and the weight of the roll paper is W , the weight to be deducted is W × ( M1Ma ) /Ma ; if the moisture content of the roll paper M1 is lower than the lower limit of delivery moisture Mb Roll paper must be on-line trial, does not affect the normal production and quality of finished products according to qualified processing, or return. It is worth mentioning that the moisture content of the test roll paper is carried out when the roll paper is accepted into the factory. When the workshop is used, it needs to follow-up on the spot, that is, quality tracking, and find out the problems in a timely manner and contact the supplier to solve.

Fifth, the performance test of the base paper. Since the general carton factory does not have the conditions for temperature-controlled room testing and the timeliness of the inspection is taken into consideration, normal testing should be adopted. As long as there is no obvious defect on the surface of the roll paper, it can be sampled in the second layer, and the technical indicators such as the quantitative, ring crush strength, burst strength, crack length, and water absorption can be measured according to the methods proposed by relevant national standards. Quantitative test is mainly to see if there is overweight or insufficient weight; the most critical of the ring pressure strength and burst strength test, the test results using regression analysis (see the article "The effect of moisture content on the strength of corrugated board"), and then refer to The two sides agreed that you can know whether it is qualified; the test crack length is mainly to understand the tensile strength of the base paper, which can be used as the main basis for the application of tile line; water absorption determines the adhesive properties of the base paper, printing performance, atmospheric moisture impact The degree of intensity, and so on. Other aspects, such as tightness, smoothness, folding resistance, flat compressive strength, oil permeability, etc., are determined according to specific needs.

Finally, carefully record each batch of paper inspection results, analyze and compare, and retain excellent suppliers (quality, price, and timely delivery), and remove unqualified suppliers from the supplier list. The inspection result of the base paper is used as an important reference in the configuration of the base paper of the line board.

Professional create value, Dongguan Haida cast quality! Dongguan Haida equipment specializing in the production of carton compression testing machine , burst strength testing machine, drop test bench , vibration testing machine and other packaging testing equipment, welcome to call!

For more detailed product series and related technical parameters, please contact:

National Unified Service Hotline: 400-0711-808

Haida International Instrument: 0769-89280808

company website: