Three Super Practical Drift Techniques

Method for adjusting drift in uneven water area

Hard tail floats are generally used for fishing. The reason is that the number of heads is relatively large (usually 11 heads) and it is better to operate. Specific method: increase the fishing height. Normally it is adjusted to 10 heads, double bait pressure is 7 heads, and normal is adjusted to 3 heads. This is the most sensitive number I think. But usually because of the uneven bottom, can not always reach the most accurate 3 heads, but as long as no less than 3 heads, more than 9 heads I think are accurate fishing target. Because in the 3 goal -9 purpose zone hook does not leave the bottom, falling is not sensitive at the end, beyond this interval is not. In this interval, basically, the situation of uneven water can be solved.

Water flow adjustment method

I generally use running lead fishing. It is generally not hooked with leveling water, plus hooks and bait fishing 1-5 mesh. It should be noted that the space beans above the lead sheet must be loosened by about 10 cm. Using this method, I generally use small floats, and in the case of a lead sinker that the small float matches cannot stabilize the fishing group, use a bigger float. The reason is that I have considered the size of the buoyancy of the float in the water, that is, the smaller the buoyancy is, the smaller the relative buoyancy is. Using this method can effectively solve the problem of instability caused by the water flow to the fishing group.

When the water flow is relatively small, an empty hook can be used to level the water and catch the bait. The state at this time should be the lead sinking. In the experiment, the younger brother found that all kinds of floats were mixed, and he could experiment at home to see what status the fish was in 1 head, 2 heads, 3 heads... To understand the floats in his hands, at least the commonly used floats.

Drifting method in water grass

I have recently been fishing in lush grasslands, and I have often obtained small squid, but I have discovered various drawbacks of using the normal fishing method. After the experiment, we went to the dregs and took the essence to get a line fishing method that was more suitable for fishing.

Because of grass holes, water grasses are easy to drift, line, etc., I use a 7-tail soft-tail float. Hanging bait is adjusted around 4 orders (according to personal habits), but it is not recommended to adjust too high. After hooking heavy objects to find the bottom, floats can be displayed in 4 to determine the end. However, because the underwater situation is complicated, it is recommended to find the bottom several times. If the bait still shows 4 heads afterwards, it can be concluded that there is no flaw in the water; if it is higher than 4 heads, it means that there is grass underneath; if the float floats down, it still catches 4 heads, and the bait is suspended on the grass; , and then float down. At this point it is still 4 heads, but the bait has left the bottom. Constantly throwing bait to determine the fish layer. (It is recommended to use a lighter weight lure.)