[ Zhonghua Wardrobe ] There are many kinds of wardrobe sheets, but for consumers, they only know two kinds when buying wardrobes. One is environmentally friendly sheets and the other is not environmentally friendly. Consumers tend to focus only on their own concerns, so the business took the opportunity to drill the environmental protection. Many consumers have even used the old-fashioned panels that are not known to be environmentally friendly and environmentally friendly.
First, the solid wood board
The wardrobe with solid wood door panel in the bedroom has the effect of returning to nature and returning to the original. Solid wood wardrobe is more suitable for middle-aged consumers who prefer pure wood. It is also the most high-grade wardrobe material on the market. Han Li's designer said that the solid wood door leaf frame is generally solid wood. In order to ensure no cracking or deformation, the door core adopts medium density board to stick solid wood skin. The solid wood door panel adopts this technology instead of the whole solid wood, just to ensure the quality. The wood itself contains a certain amount of water. If the door leaf is made of solid wood, it will inevitably be deformed for a long time. However, according to industry insiders, although the solid wood door panels are suitable for the classically decorated kitchen, it is very good. However, almost none of the domestically produced solid wood door fans can be cracked, because domestic production equipment and processing technology simply cannot meet the requirements. If you must choose, Italy, Spain imported solid wood door leaf technology, but the price is quite expensive.
Second, fiberboard
Fiberboard is a kind of board made of plant fiber as raw material, which is made by fiber separation, sizing, drying, paving, hot pressing, sawing and inspection. It is one of the leading products of artificial board. Divided into hard fiberboard, high-density fiberboard, medium-density fiberboard and softboard according to the density. Its properties are very different from the types of raw materials and manufacturing processes. The density of the hard fiberboard is 0.8 g/cm 3 or more, often a side light. Medium density fiberboard has a density of 0.45-0.88 g/cm3 and is widely used in construction and furniture manufacturing industries as well as packaging materials. The density of the soft fiberboard is below 0.4 g/cm 3 . It is a sound absorbing structure with good sound absorption and heat insulation properties, mainly used in high-grade buildings (such as theaters). There are three kinds of production methods: wet method, dry method and semi-dry method. At present, dry method is the main method. Main performance test items of fiberboard: static bending strength, elastic modulus, water absorption thickness expansion rate, formaldehyde emission, etc.
Third, particle board
Particle board (particle board): medium long wood fiber + fine wood fiber on both sides, pressed into a board. Particleboard: Take the plantation, the trunk of the natural forest, the shaving of the branches or the shavings, formed by high temperature and high pressure. The advantage is that the expansion rate is small and the stability is strong. Suitable for relatively humid environments such as kitchens. The disadvantage is that it cannot be surface-milled. The edge banding is easy to fall off (because there is a certain gap between the plates, the surface is not flat enough).
Fourth, the MDF
The wood is broken, the original fiber is pressed by high temperature, the surface is flat, the milling is easy, the stability is good, and the nail holding power is strong (because the MDF is a solid material, all nail holding power is greater than the particle board). Etc. It is better than particleboard in strength and hardness. But there are also shortcomings that are not resistant to blisters. The amount of expansion after being blistered is approximately 2 mm on one side. Therefore, the MDF is more suitable for a drier environment such as a wardrobe.
There are many types of wardrobe plates, and the original ecological only solid wood panels. However, due to the high price of solid wood panels, most people can't afford it, so manufacturers now use artificial panels. The board is the main component of the overall wardrobe, and its quality directly determines the quality of the product. Although the artificial board is cheap but not waterproof, it also reflects the price of one point.
Pe Cling Film For Food,Pe Cling Film,Cling Film Food,Kitchen Pe Cling Film
DONGGUAN YEE HUP TRADING CO,.LTD , https://www.yeehupacks.com