The basic skills that silk screen should do for foreign trade clothing (on)

Prepress

Dew/Leak: The printing paper is mostly white. When printing or making a plate, the color of the connection is not tight, exposing the white background.

White: Photo-engraving process in the era of hanging nets. To remedy the darkness of the Internet image, you can remove the original flash one time or put up a piece of paper to make up the exposure, or use the flash light directly to flash the white light to increase the depth of the original web and soften the image.

Fighting fat: Obesity certainly will be fat, and the film will have more light and expand the site. Handprinting is even more exposing and adding fertilizer to the thick film on the photosensitive film.

Trapping (Colortrapping): When color separation is done, it is intended to expand the color transfer interface and reduce the impact of overprinting.

Field: refers to the area of ​​color blocks without dots, usually refers to the full version.

Contrary to white: text or lines are printed with a negative pattern, revealing paper white.

Hit the net: not a fisherman's craft. The color separation process of the AM network, the misalignment of the dot angles, or the distance of each dot angle less than 25°, the moiré pattern begins to become apparent.

Fly net: lens plate net hanging process, remove the net after normal exposure, supplement short exposure to increase contrast.

Dog teeth: The dog's teeth are staggered. Insufficient pixels in the picture and a doglike appearance on the edge after amplification.

Rose point: like a flower deer-like texture. Poor calling pattern, worse is the moire.

Qi head: The command of the layout ranks, using the prefix as the baseline. Extended to imposition and binding, referring to the head position of the edition.

Dump: A typeset of text. Only the kerning needs to be unified, and the final writing should not be neat.

Mask: Not Ecstasy. It is a masking film for manual color separation. It can be used for film drying or red film cutting. It can be used for retreat or color correction.

Blue version: not playing basketball, not RGB B (blue), but the C (Cyan) version of CMYK. print

Ghosts: Unknown prints or shadows. Due to the uneven ink supply of the old printer.

Melon play: does not mean water melon playing dogs. In the era of letterpress printing, the typeface used by the "Mafia" in the use of tablets was lower than literally.

Inktrapping: Layering of different inks, the ratio of overprints of each color layer.

Fight: fighting the Monkey King's good show. The underside printing vehicle has automatic paper-flipping device, bites the paper mouth printing surface, anti-biting paper tail printing bottom, at one go.

Reflexive: refers to a printing method that saves printing plates. After the paper is printed on one side and the paper is reversed, the paper is reversed and the bottom surface is reversed. This is called the bottom reflexive version, and the bottom of the paper is reversed when the bottom surface of the tooth is reversed. It is the same process as the printing plate and the back of the paper.

Flying ink: The printing press rotates fast and the ink body is not dense enough. The centrifugal force causes the ink to splash.

Inkline: Draw a ruled line on the printing plate so that it is printed on the paper gauge position and the needle position can be monitored at a glance.

Fouling: The printing plate is weak in water and becomes a lipophilic one. Of course, it starts with a thin layer of oil. The problem is that the pH of the water in the bucket is not correct.

Cannon: Gun, roller commonly known. The blanket cylinder leaves the impression cylinder.

Cartridge: Too much paper is sandwiched between the impression cylinder and the blanket cylinder, and the security sensor stops the printer.

Which residue: should not be printed on the ink, the problem is also the ink and water balance.

Snoring: The printing press stops rotating for many reasons, such as misfeeds or double-feed triggers.

Needle position: not an injection position. Stamped edge position. The length of the paper, printing registration and cutting need to have a needle position to align.

Even the sun: to save film continuous printing process. Use a register cross to move the exposure.

Bottom: The terminology for printing accidents. The ink layer is too thick to dry, contaminating the back of the paper that is pressed against it.

Front (Sound): The Philippines called the driver the front. The front of the printing is not the captain, but the number of printing revolutions.

Stone number: The name of the printing quantity in the lithograph era. Embossed paper once called a stone.

Used: Not referring to secondhand goods. Refers to the printer's deputy, or 睇掣.

Writing: Instead of having a hatred with the manuscript, a prototype is printed in advance with a proofer.

Feida: It is not a courier. It is a conveying device for printing paper feeding. Binding