See Hot Stamping Equipment from Hot Stamping Technology (I)

In the fierce competition in the market, in order to highlight the exquisite product packaging, increase the added value of products and more effectively carry out anti-counterfeiting, more and more product packaging using hot stamping equipment must have high speed, high accuracy and easy operation. Wide range of applications and other characteristics.
The market's demand for hot stamping equipment has driven the constant updating and creation of stamping equipment manufacturers. In the face of numerous equipment manufacturers and colorful hot stamping equipment, it is especially important for printing companies to carefully select and support hot stamping equipment.
At present, the hot stamping process can be divided into ordinary hot stamping, hot stamping and embossing once completed, and hologram trademark hot stamping in three main ways.
First, the ordinary hot stamping According to the different aluminum materials, ordinary hot stamping is divided into ordinary aluminum production process is different, so there is a situation in the peeling of the laser in the hot stamping of aluminum foil is more difficult, reflecting the appearance of a hot stamping aluminum foil If it is not true, the peeling is incomplete and hot spots are not present. At this time, contact the supplier of aluminum materials. According to the texture of the stamping substrate (substrate), the supplier shall provide more suitable anodized aluminum materials, and in the normal aluminum In hot stamping, according to the requirements of different atmospheres in different aluminum production plants, the most appropriate temperature, speed, and pressure are selected during hot stamping to achieve the best results of hot stamping.
Commonly used hot stamping processes are round flat stamping and flat stamping, among which the round stamping stamping has many unique features due to its line contact.
1. Hot Stamping Substrate The widely different hot stamping substrates have different requirements for anodized aluminum and hot stamping equipment. Because the aluminum foil has certain adaptability requirements for the hot stamping substrate, before the hot stamping on the surface of different substrates, it is first necessary to inquire about the application of different aluminum grades on different materials, such as on the white card. Hot stamping on paper, ink, UV inks and composite films requires slightly different galvanized aluminum. In addition, choosing the right equipment for different hot stamping substrates is also very important. For example, in the case of hot stamping on coated paper, the time required for the thermal contact between the electrodeposited aluminum and the thin wax is not too long, but it is necessary to ensure the normal transfer of the electrochemical aluminum. Therefore, the same type of electrochemical aluminum used for coating is used. Only the flattened hot stamping method can be used, because the round hot stamping method is the line contact, the entire paper hot press time is longer, but the contact time evenly distributed on each line is very short, so as not to damage the film Layer, and the temperature is even, it can show the bright effect of hot stamping anodized aluminum.
2. Suitable for large-area hot stamping When hot stamping a large area of ​​electro-aluminum (such as field and pass-through lines), the round-press hot stamping method is also better than the flat-press hot stamping method. Because of the round hard-line contact method, it is easier to remove the aluminum foil and completely eliminate the air, effectively solving the phenomenon of misprints and stencils that often appear in flat stamping and hot stamping.
In order to achieve anti-counterfeiting and increase the added value of goods, most of the products in modern hot stamping are registration hot stamping, and the precision requirements are very high. Hengheng MK series round flattening hot stamping machine is improved on the basis of the original Heidelberg printing machine. With the superior performance of the world's excellent printing presses, the repeated hot stamping accuracy can meet the requirements of the screen four-color printing. Therefore, it provides a strong guarantee for hot stamping, and the accuracy of repeated hot stamping can be within plus or minus 0.02 mm. However, if such equipment is not completely refurbished, it is difficult to achieve such accuracy requirements.
Although the flat pressing hot stamping machine has great difficulty in solving the hot stamping accuracy problem, the hot stamping speed is high and it is suitable for processing large-volume long-lived jobs.
At present, domestic flat stamping stamping equipment is limited by the material and heat treatment process, and the accuracy of secondary repeat printing needs to be improved; while the high precision Bobst stamping machine is also expensive. Therefore, Hengheng Company has introduced a flat stamping press on the basis of the introduction of foreign advanced technology and key materials and components. Its secondary hot stamping accuracy can reach plus or minus 0.085mm, basically meeting the customer's requirements for overprinting, and at the same time overcoming The low-speed problem of round flattening stamping machine, the highest hot stamping speed can reach 5000 sheets/hour.
The above is the advantages and disadvantages of the flat pressing hot stamping and the round pressing hot stamping machine in thick paper hot stamping. Thin paper sets should be printed when printing the advantages and disadvantages. In the thin paper sleeve hot, you should buy round press hot stamping machine, because the flat pressure equipment is limited by the structure is difficult to control the smooth running of the thin paper in the run, in the mass production, the use of flat pressing equipment hot stamping Thin paper can be written as a large scrap rate, which is inconsistent with high speed.
Second, hot stamping, embossing bump once completed In fact, as early as the early 1980s, many manufacturers in China have completed a hot stamping, embossing attempts, but the process only stays in the gap is not high precision micro hot words Level. In recent years, more and more manufacturers have asked to complete the set of hot stamping on the product, and it is required to stamp out the obvious bumpy images. The key to this process is plate making. After the ordinary hot stamping plate is corroded, the graphic part is a right-angled line, while the hot stamping, embossing and stamping hot forming plate requires the graphic part to be a fillet line, so it is used for hot stamping and embossing once. The hot stamping plate of the molding must be treated after the corrosion, and the artists who are proficient in the process in the country are reduced year by year, making this process limited. As a last resort, many manufacturers have to go abroad to make plates. The international well-known plate-making company - Kurz Company adopts advanced electric carving method to produce hot stamping, embossing and stamping one-step hot stamping printing plate with high precision. Although the price is expensive, the hot stamping effect is very exquisite.
This process in the selection of equipment, we must choose a high precision stamping machine, because this process requires the two convex and concave template, once the machine is not enough precision, it will cause the male mold damage. Although the accuracy of circular flattening and hot stamping equipment is high, but it is difficult to operate, special attention must be paid to the thickness of the drum lining and the height of the lower platen to ensure that the line speed of the equipment during operation is consistent. Otherwise, the plate speed may be caused by inconsistent line speeds. Because of the accuracy problem of most flattening and hot stamping machines, after the second edition, the edition will change, and it is very easy to cause damage to the punch. The new company's MK Series A round flat pressing hot stamping machine adopts a patented lifting platform device, effectively solving the above problems, and is currently being promoted. If there is a Hengping flattening hot stamping machine, the operation will be more convenient than a round flattening hot stamping machine. However, no matter what equipment is used in this process, it must be carefully adjusted. (To be continued)