Rosewood furniture is called mahogany furniture in many areas of the north, and rosewood is also divided into red rosewood, black rosewood and white rosewood. There is also a folk called flower rosewood. So what are the maintenance methods for rosewood furniture?
Rosewood furniture maintenance method
1. The surface of rosewood furniture is prohibited from cleaning with gasoline, acetone and other organic solvents to avoid chemical reaction with the wax on the furniture surface.
2. After a cold or overheated utensil or item is placed on the surface of the furniture, a “white mark†phenomenon will appear, which affects the appearance. This phenomenon is only a natural reaction of the wax on the surface of the furniture, and the wood itself is not injured. It is very simple to handle, just polish it with 800 sandpaper, and wipe it with a cloth.
3, rosewood furniture should be damp, avoid drying, it is not suitable for exposure, avoid air conditioning against the rosewood furniture.
4, the rosewood furniture should not be placed in direct sunlight, placed for too long, the furniture surface is affected by the ultraviolet rays in the sun and faded.
5. During the first two to three years of use, it is best to use a solid floor wax for a full waxing maintenance during the seasons. In the process of use, the furniture will constantly “anti-oil†from the inside to the outside, and it has excellent self-maintenance effect. After a few years of “pasting†phenomenon, there is no need to wax again.
6, the rain season to open the window ventilation, in the air-conditioned room, the temperature must be maintained at 15-25 degrees, or put a proper amount of bonsai, fish tank next to the furniture, can adjust the relative humidity of the air. Hardwood furniture shrinks when the air humidity is too low, and expands when it is too high. When using the device, be careful not to place it in a place that is too humid or too dry, such as near a hot and hot place such as a stove heater, or in a place that is too humid in the basement to avoid mold and cracking. Non-breathable materials such as plastic sheets should not be placed on the table.
7, the handling should be handled with care, in use, avoid sharp objects hit hard, if there is dust, greasy, can be used to clean the soft cotton cloth.
8, in the wiping process, it is best to use a coarse cloth to wipe, for a long time, the furniture surface will be more shiny, smooth. There are many places for carving and hollowing out in hardwood furniture. Some places are difficult to handle with a cloth, as long as it is brushed with a shoe brush, and the harder the brown hair of the brush is, the better.
Tips for maintenance of rosewood furniture
Everyday wiping mahogany furniture should conform to the direction of wood grain
In the process of daily cleaning of rosewood furniture, it is best to wipe with a coarse cloth. The surface of the furniture will be more shiny and smooth. There are many places for carving and hollowing out in hardwood furniture. Some places are difficult to handle with a cloth, as long as it is brushed with a shoe brush, and the harder the brown hair of the brush is, the better. Moreover, during the wiping process, it is best to wipe in the direction of the wood grain, so that the rosewood furniture looks more beautiful in wood grain.
The rosewood furniture is placed with care
There is also a certain relationship between the placement and maintenance of rosewood furniture. In the bungalow, the case, the cabinet, and the table should be kept at a distance of one centimeter from the wall, and should not be close to the wall. Because if it is too close, the moisture on the brick wall will erode the furniture, make the furniture damp, and damage the wax layer or patina on the furniture surface, thus damaging the wood.
How to wax the rosewood furniture
Rosewood furniture should be waxed once after using it for a period of time. It is very helpful for the maintenance of rosewood furniture. It should be noted that waxing should be carried out after the dust is completely removed, otherwise wax spots will be formed or abrasion will occur. mark. When waxing, it is necessary to master the principle of shallow to deep, from point to surface, step by step, and evenly wax. Of course, the most ideal is to go to the professional manufacturers to wax.
Another method is to wax the wax, dry the wax on the surface of the furniture, then use a hot hair dryer to blow the wax into a liquid, brush it with a brown brush, wait for it to cool and solidify, and then use a wood chip or bamboo to surface Remove the floating wax, and finally use a brown brush and cloth to "shake" and polish. This is a more professional and difficult method. If you don't get it, you will make the patina a "new". It is not recommended for amateurs and novices to adopt.
What should I do if the rosewood furniture parts are loose?
If you encounter loose parts of rosewood furniture, don't be nervous. In fact, the more furniture made of high-quality wood, the more likely it is. Try using a toothpick, white glue or cardboard to tuck it and tighten it. Never use 502 to stick it.
If the components of the rosewood furniture fall off (such as a drawer ring, etc.), the most important thing to note is that the part that is detached is protected, and the jargon is called "the dead body is inseparable." This detached part can be tied to the furniture with the same color of wool, if it is a part of the cabinet or drawer, it can also be placed in a cabinet or drawer. Don't let it go freely, so as not to lose it for a long time or to abandon it for other reasons. Otherwise, once it can be repaired, if you can't find the missing parts, it is almost impossible to find the original parts.
For more information on furniture, please pay attention to the official website of Xianghe Furniture City http://
Plastic Bowl,Plastic Serving Bowls,Transparent Bowl Plastic,Clear Plastic Bowls
EVER GREEN(ZHEJIANG)NEW MATERIAL CO., LTD / KUNSHAN GREENPACK CO.,LTD , https://www.changjingpack.com