[ Chinese wardrobe net ] Drawer rails are common parts in the whole wardrobe . But for most unfamiliar consumers, the replacement of the whole wardrobe drawer slide is not a simple matter. How to remove the whole wardrobe drawer rail? What are the precautions? Let's understand it.
How to remove the whole wardrobe drawer rail
To understand how to remove the overall wardrobe drawer rails, first understand the construction of the drawer rails, and only after understanding the overall structure of the rails can the disassembly be targeted. There are many types of drawer slides, there are three guide rails and two guide rails. Different types of disassembly methods are different, so to understand the type and structure, the drawer guide can be removed in the correct way. Our common drawer guides are three-section rails and two-section rails. Below we analyze the three-section rails that are made up of several pieces. The basic components of the overall wardrobe drawer slide are: the outer frame, the middle frame, the inner frame, the ball seat, the ball and the control rod.
Understand the structure of the overall wardrobe drawer rail, let's understand how to remove the whole wardrobe drawer rail. The first is to determine which type of rail the drawer uses. The overall wardrobe drawer rails that are generally used are two or three sections, mainly depending on the depth of their overall wardrobe. If it is a two- or three-section guide rail, gently pull out the drawer cabinet before disassembly. When you want to pull it to the end, look carefully at the two sides of the cabinet. There is a junction at the second or third section. More pointed things, usually on both sides of the cabinet, we call this the fork, after finding the fork, carefully watch the fork is up or down, if it is up, move down, move to the end, Do not let go until the third section of the rail is pulled out. If there is a drawer, pull out the drawer together. If it is a pick-up card, you can press it down and you can hear a crisp sound when you press it. This time it is turned on. When disassembling the whole drawer drawer guide, you should also pay attention to the fact that when pulling out the drawer, you must pay attention to the pull of the water, so that it will not cause damage to the drawer and the whole wardrobe cabinet. Secondly, the buttons on both sides of the drawer must be To lightly press, if you can't press it, there may be something stuck, you need to check it. After removing the lower drawer, the guide rail can be removed with a screwdriver. After the replacement, the order of installation is the same.
How to replace the whole wardrobe drawer rail? I believe that after reading the above analysis, everyone has already understood the disassembly of the whole wardrobe drawer rail. As long as you understand the structure inside, pay attention to the details of some operations, you can easily remove and replace the whole wardrobe drawer rail. Mastered these basic disassembly and assembly common sense, after the home encountered a drawer rail failure, you can easily get it.
Jiangsu Sleeptight Household Technology Co., Ltd. , https://www.sleeptightoem.com