Epoxy adhesive composition (below)

10, glycidyl amine epoxy resin

11. Alicyclic epoxy resin

The chemical name is alicyclic diepoxide, which is usually a type of epoxy compound obtained by oxidation of the corresponding unsaturated aliphatic compound and a family compound with a peroxidic organic acid. The water content in the structure is alicyclic, and the epoxy group is attached to the alicyclic ring. Since no epichlorohydrin is used as a raw material in synthesis, the organochlorine content of the product is 0. It has excellent electrical properties, high volume resistivity and surface resistivity. , arc resistance and good resistance to leakage traces. The cured product has a large cross-link density, high heat resistance, good weatherability, resistance to ultraviolet light, and resistance to electron radiation.

12. TDE-85 epoxy resin (chemical name is 4,5-epoxycyclohexane-1,2 dicarboxylic acid diglycidyl ester)

13. Polybutadiene Epoxy Resin

Polybutadiene epoxy resin, also known as epoxidized polybutadiene resin, is based on 1,3-butadiene and metal sodium is used as a catalyst in solvents.

14, fluorinated epoxy resin

Due to the introduction of fluorine atoms, the molecular structure is dense and the fluorocarbon atoms are closely arranged around the resin backbone. Therefore, the surface tension, coefficient of friction, and refractive index are very low, and they are extremely excellent in corrosion resistance, wear resistance, heat resistance, stain resistance, and durability. However, high prices cannot be used as a general purpose.

15, polyether epoxy resin

Polypropylene glycol and epichlorohydrin polycondensation reaction in the presence of sodium hydroxide, light yellow uniform liquid

16, polyurethane epoxy resin

It is also known as epoxy urethane resin, which is produced from polyester (or ether) polyol and epichlorohydrin under the action of BF3 and NaOH to generate polyol glycidyl ether and then added with diisocyanate to polycondense.

17, naphthalene epoxy resin

Synthetic linear naphthol phenolic resin from naphthol and formaldehyde or dihydroxynaphthalene (NDOL) and epichlorohydrin catalyzed by sodium hydroxide catalyzed condensation, high heat resistance, low water absorption, low linear expansion coefficient

18, silicone epoxy

The epoxides containing silicon in the molecular structure are co-condensed with polymethylphenylsiloxane and epoxy resins. Toluene solution, light yellow uniform liquid

19, organic titanium epoxy resin

It is derived from the reaction of hydroxyl groups in bisphenol A epoxy resin with n-butyl titanate. The introduction of titanium as a metallic element in the resin not only solves the problem of increased water absorption caused by the presence of hydroxyl groups, moisture resistance, and reduced electrical properties, but also due to the presence of oxygen atoms of P electrons in the resin and titanium precursors with D electron vacancies. Direct connection leads to the PD conjugated effect in the macromolecular chain, which leads to a significant increase in heat aging resistance and better dielectric properties. The appearance of yellow to amber high viscosity transparent liquid.

20. The chemical name of organic boron epoxy resin is polybutylene oxide carborane

21. Oxygen-containing epoxy resin refers to a resin containing phosphorus and an oxygen-free group in the same water content, and a phosphorus-containing epoxy resin is prepared by reacting trimethylolphosphine oxide with epichlorohydrin.