The same is the sheet furniture, is it better to use the particle board or the multi-layer board? This is a problem that people often encounter in custom furniture.
To solve this problem, we must first understand these two materials:
Particle board
Solid wood particle board is a kind of particle board. It is made of wood or other lignocellulosic material. The fine wood fiber is used on both sides, the long wood fiber is sandwiched in the middle, and the artificial board is glued under the action of heat and pressure. , is a sheet produced by the particleboard process. Today, solid wood particle board has been used by most domestic custom companies and has become one of the mainstream plates in the market in recent years. Wardrobes, cabinets and other finished particleboards will be used as a finishing layer for cutting, pre-punching and edge-sealing, and finally into panel furniture and wardrobes.
Compared with multi-layer boards, the purchase price of particle board is relatively low, and the secondary processing (furniture, closet factory) is low in difficulty, no need to paint, and it is convenient to make. In addition, the particle board is suitable for large-scale mechanical processing, the precision is easy to control, the output is high, the transportation is convenient, and the supply chain advantage is domestic, which is beneficial to reducing the cost.
The particle board decoration performance is also relatively strong, and it performs well in moisture proof, scratch resistance, high temperature resistance, etc. It has many colors and can be surfaced and embossed. Nowadays, the production technology of particle board is very mature. It is not only used by domestic big brands, but also widely used by many furniture manufacturers in Europe and America. Quality and environmental protection can be well controlled.
Multilayer board
Multilayer boards, also called plywood, are one of the commonly used materials for furniture. The multi-layer board is a three-layer or multi-layered sheet material which is formed by cutting a wooden section into a veneer or by cutting into a thin wood by wood, and then bonding with an adhesive, usually using an odd number of veneers and making adjacent layers. The fiber directions of the veneers are glued perpendicularly to each other. Commonly used are plywood, plywood and so on. Plywood can improve wood utilization and is a major way to save wood.
The multi-layer board has good structural strength and good stability, and has the advantages of light material, high strength, good elasticity and toughness, impact resistance and vibration, easy processing and finishing, and insulation. However, the same brand, the same thickness of the board, the multi-layer board is more expensive than the particle board. In terms of environmental protection, the multi-layer board has the characteristics of no paint, and the environmental protection is better. However, the two sheets also need to use a lot of glue, and the construction should be done with edge sealing to reduce pollution.
Most consumers who have experienced custom furniture will find that most of the large custom brands on the market use solid wood particle board as the main material, while some brands with relatively low reputation respect the use of multi-layer boards and ecological boards. In fact, no matter what kind of materials are used by brand owners, there are advantages and disadvantages, and there is no such thing as a good or bad material.
Extended reading: consumers blindly from the furniture plate purchase trap area
Under the same materials, the large-volume purchase of large brands and high mechanized production have more competitive advantages than small brands. However, the service cost, management cost and marketing cost of big brands are higher than those of small brands, and it is easier to select materials with high cost performance. Expand the market and ensure profits. Small brands in the case of procurement costs and mechanized production costs are higher than the big brands, misplaced marketing, naturally do not recommend particle board, the use of other materials also meet the custom needs of furniture.
The brand positioning of a business determines its market path, and the quality of the product determines its true value. Therefore, in the purchase, consumers should not be convinced of the side of the business, before customizing the furniture, you may wish to understand the advantages and disadvantages of the particle board and the multi-layer board, and then decide which material to use according to your own budget and needs.
Nantong Zhuoluo International Trading Co., Ltd , https://www.zlhomedecor.com