Many people may understand that some small printing companies often use sulfuric acid paper instead of film for plate making. The advantage of this is that it is convenient and fast. In the business card printing and black-and-white parts printing, where the printing quality is not very high, the application of sulfuric acid paper is very universal. So what do you need to pay attention to when printing a paper with sulfuric acid paper?
    First of all, if it is an old printer, then the printer that prints the sulfuric acid paper should have as many blank papers as possible to ensure that the heating is hot enough, and that the sulfuric acid paper is dry and then output; when outputting, it is output to the sulfuric acid paper in a mirror direction;
    Printers that print sulfuric acid paper use a gasoline or other solution to dilute the printed content before printing. You can increase the density of the printed toner to achieve blackening effect; this solution is called blackening agent, and the printing surface is facing down when printing. Drying board
    In addition, printers that print sulphuric acid papers should also pay attention to it. If there is no coloring of sulfuric acid paper, the smashing will be a bit of a bit. If you need precise coloring, it is recommended to use thick dots, and try to remove the color in one color. Simultaneous output on a piece of sulfuric acid paper, this method can reduce the problem of inaccurate color registration of sulfuric acid paper; the timing of the drying time varies depending on the density of the printed matter. If the blackening is applied, the drying time can be adjusted without the same time. Time is also available. If there is no blackening and the toner is thin and not black, it is necessary to reduce the exposure time.
    The above are some things to note about printers that print sulfuric acid paper, and I hope to help you.
ARC Advanced Royal Champion , https://www.arcimportcorp.com