What problems should be noticed when operating the rain tester?

What problems should be noticed when operating the rain tester? The operation of the rain test machine must pay attention to the specification during the process, and there are many issues that should be noted. To this end, Haida Xiaobian tells you what problems should be noticed when operating the rain tester?
1, the machine must be professional operation;
2, each boot check circuit control system;
3. Check whether there is water in the tank before running, and it is not necessary to fill it first;
4. When the machine is not working, it needs to be kept dry, drain the running water, and dry the studio and cabinet;
5, after the failure to solve the operation, anti-corrosion affect the life of the machine;
6. Prohibit chemicals from contacting the equipment;
7, power and ground wire need to confirm;
8. Whether the power cord is properly connected according to the specifications and grounded;
9, indoor ventilation fans should be installed to maintain ventilation;
10. Wastewater discharge system must be installed in place;
11. After the test is completed, remove the sample and clean the inside of the machine.
12. After the test is completed, the power of the whole machine is cut off;
13. The machine will run for a long time. If the water spray hole is blocked, remove the pipeline, and then rinse it and then assemble it;
14. Avoid dust intrusion into the equipment. After use, cover the plastic cover.
The above-mentioned problems can not be ignored before or after the use of the customer, and the details have been completed. It is believed that the process must be smooth.