[ Chinese wardrobe net ] sliding door wardrobe is not very occupied, but also relatively fashionable, is the first choice for everyone to buy a wardrobe. As the most popular wardrobe style in recent years, do you know which parts of the bedroom wardrobe sliding door are made up? How to clean and maintain?
1. Door panel: Most of the wardrobe sliding door panels are glass or high-density panels. For glass door panels, use soft, dry cotton or silk to wipe them on weekdays. Do not wipe them with hard or hard rags, which may scratch the surface. Every time or when there is severe stain on the door panel, it can be wiped with diluted neutral detergent or glass special detergent, and then dried with dry cotton, lint-free cloth; for high-density board, it is not suitable Wipe with a general detergent, often with a dry cotton rag. If it is cleaned with water, be sure to dry it with a dry cotton rag.
2. Pulley: The pulley is the soul of the sliding door. Although its size is small, its effect is very important, so it is necessary to pay attention to the maintenance of the pulley. The pulley of the sliding door is divided into upper and lower wheels. If the upper and lower wheels are slid by the needle bearing, there is no need to add lubricating oil, so just pay attention to cleaning the sundries. If it is a general bearing or rubber wheel, it is necessary to add lubricating oil to its sliding part every six months or so to keep it smooth. In addition, it is a normal phenomenon that the light rail door pulleys are used for a long time. To ensure that the pulleys are smooth and quiet for a long time, the lubricating oil can be added along the upper and lower pulleys every 2 to 3 months.
3. Track: The bottom rail is easy to accumulate floating dust, which directly affects the sliding of the bottom wheel, thus affecting the service life of the sliding door. The clean track will greatly extend the service life of the pulley. Therefore, it is necessary to pay attention to the frequent removal of the bottom rail floating dust and hard objects. It can be removed with a vacuum cleaner, cleaned with a rag on the corners, and wiped dry with a lint-free cotton cloth. In addition, to prevent external forces from hitting and hitting the slide rails, the push-pull action should be gentle to prevent violent violent impact. If there is a gap in the upper track locator, use a hex wrench to align the locator to the side of the side plate and push it to the tight seam.
4. Border: The frame of the sliding door is mostly made of metal material. It can be wiped with a dry cotton rag for daily cleaning. If it is cleaned with water, it should be wrung out as much as possible, and dried with a dry cloth after cleaning to avoid damage to the metal surface and affect the appearance. Do not use chemical cleaners or acidic liquids. If it is found to have hard-to-remove black spots on the surface, wipe it with a little alcohol.
The advantages of PET cap: excellent high and low temperature performance, can be used in the 120℃ temperature range for a long time, short-term use can be resistant to 150℃ high temperature, can be resistant to -70℃ low temperature, and high and low temperature has little effect on its mechanical properties. Non-toxic, tasteless, good health and safety, can be directly used for food packaging.
Pet Bowl Lid,Pet Food Bowl Lid,Pet Bowl With Cover,Disposable Pet Food Bowls
Guangxi U-Yee Environmental Technology Co.,Ltd , https://www.biodegradetableware.com