[Wardrobe maintenance] How to maintain the wardrobe to prevent deformation?

[Chinese wardrobe network] [difficulties] I heard that the wardrobe will be deformed when it enters the water. Recently, I bought a new wardrobe, but it rains every day. I am worried that the wardrobe will be deformed because of the wet weather.

[Question] How to maintain the wardrobe to prevent deformation?

【Best answer】

Cabinets are an important part of bedroom furniture and one of the larger pieces that make up bedroom furniture. The most dissatisfied with consumers about the cabinet is that the cabinet door may be warped and deformed. In fact, in addition to the material and design reasons, the influence of unfavorable factors in the processing process is the main reason for the bending deformation of the long door of the high cabinet.

1. Avoid the use of irritating and corrosive chemicals such as alcohol and detergents that are easily damaged by wood.

2, wooden wardrobe, usually just wipe with a clean rag, but if there is dirt, you can use soap or neutral detergent, wipe with a damp cloth.

3. Ultraviolet rays are also destructive to wood furniture. Therefore, it is necessary to use cloth or curtains to avoid sun exposure.

4, if you want to wax, it is best to choose a higher concentration of solid, silicone-free wax, so as not to damage the paint surface.

5, improper coating treatment caused the deformation of the plate furniture parts. Component stacking causes deformation in production, some operators are convenient for drawing, stacking the plates freely, or stacking the plates is not flat, and even leaning the plate against the wall, causing the plates to enter Before the next process, it was deformed due to its own weight. The coating process causes deformation During the finishing process, due to improper use of the process and raw materials, the plate is deformed and deformed as the internal stress of the coating changes. The effect of finishing putty In the decoration of the door parts, many manufacturers use pig blood putty or glue to prepare the putty in order to reduce the cost. Because these two kinds of putty contain a lot of water, the substrate commonly used for plate furniture - medium density Fibreboard and particleboard are particularly hygroscopic, so when one side of the door panel is not putty, and the other side is coated with such a water-rich putty, the door panel part is hygroscopic and deformed. The influence of the drying process is in the production. When the board is coated with putty or paint, it should be placed on the drying rack for natural drying. If the rod of the drying rack is too sparse or uneven, it will also cause the door. The part was found to be bent and deformed during the drying of the paint.

Galvanized Chain Link Fence

TYL wire mesh provide chain link wire mesh fence. It is also known as diamond fence. Chain Link Fence has the features of woven simple, beauty and practical. The finish treatment is galvanized. Chain link fence are widely used as protective fence in residential sites, roads and sports fields. It is normally erected along a fence line of tubular steel posts. It is widely used in super highway, airport, garden, etc.We also have hexagonal wire netting, weld wire mesh, 3D fence panel, galvanized iron wire, garden wire, and Garden Gate for your choice.

Packing: Make each end plastic bag or woven bag.

Usage: widely used in super highway, airport, sport yard, garden.

The top and bottom of this fence can be formed by a knuckle or twist edge (see illustrations Type A and Type B).

Hot Dipped Galvanized Chain Link Fence, Galvanized Chain Link Fence Roll,Diamond Stainless Steel Mesh,Chain-Link Fabric

DINGZHOU TIAN YILONG METAL PRODUCTS CO., LTD. , https://www.wiremeshsolution.com