In fact, toilet installation is not a technical problem, as long as you understand the installation method, you can also install it yourself; although simple, but the steps are clear and clear, the use of it will not have unnecessary problems. Today's decoration home decoration network Xiaobian will introduce the toilet installation method for everyone!
1, check the sewage pipeline, ground level
Before installing the toilet, you need to conduct a comprehensive inspection of the sewage pipeline to see if there are any mud and sand, waste paper and other debris in the pipeline. Also check whether the ground around the toilet installation position is flat. If the ground is not flat, you should install the toilet. The ground is leveled.
2. Determine the center of the sewage pipe
Turn the toilet over, define the center on the toilet drain, and draw the cross centerline. The centerline should extend to the foot of the bottom of the toilet.
3, fixed toilet
Determine the center of the toilet drain, then align the toilet with the cross line of the floor drain, keep the toilet installed horizontally, and press firmly on the seal to install the anchor and trim cap.
4, do a good bottom seal
Install a special sealing ring on the sewage outlet of the toilet, or put a circle of glass glue and cement mortar around it. The ratio of cement to sand is 1:3.
5, install the water tank accessories
Drain the pipe for 3-5 minutes to ensure the cleanliness of the water pipe, install the angle valve and the connecting hose, connect the hose to the installed water tank fitting inlet valve and press the water source.
Check whether the inlet valve and the inlet of the inlet valve are normal. Check whether the installation position of the drain valve is flexible, whether there is jamming, leakage or leakage of the inlet valve filter device.
After reading the toilet installation method introduced by the decoration house Xiaobian Xiaobian, I don’t know if you learned it. The most important thing to install the toilet is to determine the center of the drain pipe and the fixed, the bottom seal will be relatively difficult to handle, and the other parts are quite simple. If you still don't understand or want to know more about the wonderful knowledge, please pay attention to our life encyclopedia section, life can be more exciting!
Disinfection Machine Thermometer
The temperature measurement and disinfection integrated machine integrates automatic body temperature detection and automatic dispensing of hand sanitizer, which is more convenient and cost-effective. Compared with the face temperature measurement all-in-one machine which is greatly affected by the outdoor environment, it has stronger environmental temperature adaptability and can still be used normally in complex environments. Even if it is applied outdoors, it will not be affected by the surrounding environment. And affect the accuracy of temperature measurement
Wall Mounted Thermometer Hand Sanitizer, Spray Dispenser Automatic Sensor Thermometer, Hand Temperature Measurement Dispenser
Guangdong Zecheng Intelligent Technology Co., Ltd , https://www.zecheng-security.com