What should I do if the washing machine does not enter the water ? This is a headache. Then let the decoration home decoration network Xiaobian introduce you to the reasons for not entering the water. The maintenance method and the precautions when using the washing machine. I hope to help everyone.
First, what is the reason why the washing machine does not enter the water?
1. When the washing machine does not enter the water, we should check whether the inlet valve filter is blocked and the inlet valve is damaged. When we confirm that the two are in good condition, we can use the multimeter AC voltage to measure the voltage of 220V at both ends of the solenoid valve. Prove that the fault is in the solenoid valve itself. The electrical resistance is used to measure the resistance of the solenoid valve coil. The normal value should be 4.5 to 5.1 kΩ. The measured resistance is infinite. The magnetic inlet valve coil is burnt out, the inlet valve is replaced, and the fault is eliminated.
2. The fault that may occur in the washing machine is that the water does not stop. The water intake of the washing machine has reached the rated water level, and the water inlet solenoid valve still does not stop entering the water. This situation is generally caused by damage to the water level pressure switch. We can use the air pressure method to judge
3. Remove the water level switch, blow the gas through the return pipe, and measure the resistance between the two lugs of the water level switch with a multimeter. The resistance should be zero when blowing, and the resistance should be greater than 10kΩ when not blowing. After checking that the measured resistance value of this machine is always large and the operation sound of the contact inside the water level switch is not heard, this indicates that the pressure switch has failed. After replacing the water level pressure switch, the problem is solved and the problem of the washing machine is solved.
Second, the washing machine does not enter the water maintenance method
1. Check the faucet. Nowadays, many automatic washing machines will not operate if there is no water inflow. Of course, a small number of washing machines will not operate if they do not enter the water. Generally speaking, the automatic washing machine does not enter the water. First of all, you have to think about whether the faucet of the fully automatic washing machine has a switch. You have not opened it. If it is, then you can open the switch. Another situation is that your faucet switch is broken.
2. The water pressure is too low. A large possibility that a fully automatic washing machine does not enter the water is its water pressure. If the water pressure is too low, it may not be able to allow water to flow into the washing machine, so that the washing machine will not enter the water.
3. The washing machine is faulty. If neither of the above is true, then you should consider whether it is a problem with a fully automatic washing machine.
Third, the washing machine use precautions
1. Pay attention to the amount of water used. Excessive water consumption may not be able to wash well, but will cause water to overflow. If the water consumption is too small, it may affect the washing effect and increase the wear and tear of the laundry. Generally, when washing 1.5 kg of clothes, the water consumption is about 30 kg; 3 to 5 kg of clothes, about 50 kg, only moderate water, the clothes can be evenly rolled, and the washing degree is also high.
2. Pay attention to excessive laundry. Ordinary washing machines all have a nominal laundry weight. If too much laundry is put in the laundry, not only the tumbling is poor, the wear rate is high, the washing degree is low, and the motor may be burnt due to overload.
3. Pay attention to the long washing time. The washing time is long, the effect is not necessarily good, and the washing degree is obvious when the washing starts, but after a certain period of time, the washing degree is difficult to be further increased, and at this time, the wear rate of the laundry is increased.
4, pay attention to hard objects. Remove the coins and sundries from the pocket before washing. The metal buttons should be buckled on the metal buttons and the clothes should be turned over so that the metal buttons are not exposed to prevent the metal and other hard objects from damaging the washing tub during the washing process. Wave wheel.
5. Pay attention to whether the washing machine is abnormal. If it is found that the washing machine is running abnormally, does not start, the speed is obviously slow, smoke, water leakage, electric leakage, and burnt smell, the power should be cut off immediately, and the fault can be used.
6, pay attention to dehydration do not open the cover. When the washing machine is dehydrated or the dewatering bucket does not stop rotating completely, please do not open the cover to avoid danger!
And it is Xiaobian's method and reason for repairing the washing machine without water. I hope it will help you. If it is not comprehensive, please continue to pay attention to the decoration home network.
More related wonderful reading:
The washing machine does not enter the water, the washing machine does not enter the water maintenance method
What is the reason why the automatic washing machine does not enter the water? How to deal with it?
Depositing Hair Color Mask Conditioner
Depositing Hair Color Mask Conditioner delivers gorgeous, high-quality color for multi-tonal and natural-looking results. Works on different hair types and textures. Depositing Hair Color Mask Conditioner is a cream-based formula and does not damage your hair-it has been shown to actually improve the condition of your hair according to an independent clinical study.
Depositing Hair Color Mask Conditioner
DELIN HAIR COSMETICS , https://www.hairstylingwaxfactory.com