Maintenance I: Most of the current amusement equipment is outdoors, so we must often be baptized with wind and rain. If it is wet by rain, it should first be moved to a dry surface. After the water inside is drained clean, dry it to avoid water erosion.
Maintenance II: The material of amusement equipment is mostly plastic, fiberglass and metal. When we are cleaning plastics and FRP, we can dilute it with soapy water, disinfecting washing powder, bleaching powder, etc., then wipe it with a soft cloth or soft brush and rinse it with clean water. If the metal part is to be rust-removed, it can be brushed with a brush to remove rust and wiped with a dry cloth. After sun exposure, it can be sprayed with paint once more, and then sprayed again after drying to protect it. After the paint is completely dry, it is washed, dried and disinfected.
Maintenance 3: When the circuit part is cleaned, it must be ensured that the power is turned off. Scrub with a damp cloth that does not have water, and then dry it and then turn on the power.
Maintenance 4: In the maintenance of the equipment must also check the connection is not a solid part of the metal parts of the frequent connections, electrical circuits and ordinary parts are not damaged, all parts can not stay spiked part to avoid leaving security risks.
Door Hardware,Door Strike Plate,Glass Door Stopper,Door Hardware Plate
BNF HARDWARE CO., LTD , https://www.bnfhardware.cn