Solve the glitch of the electronic scale in daily use

The outer casing of the electronic scale is made of hard material. During the long-term use, the outer casing of the electronic scale is basically no problem, but the problem is precisely the scale we can't see. We all know that the scales are all internal electronic components. The long-term operation of electronic components in harsh environments will inevitably lead to some minor problems. We are at a loss what to do with these problems. If you are not a professional maintenance person, please go down.

The next example is a long-time professional in the maintenance of electronic scales to provide you with some easy-to-understand skills, handle your electronic scale failure with your hands.

1. When the scale is turned on, the display shows the number and jumps irregularly.

Solution: For this kind of problem, consider that the water vapor in the junction box is too heavy and should be blown dry with a hair dryer.

2. The weighing result is light or heavy after normal power on.

Solution: Recalibrate the electronic scale according to the instruction manual. If the problem remains unresolved after calibration, you should consider that the sensor has been damaged.

3. After the weighing is completed, the weight is removed and the display does not return to zero.

Solution: The above situation should be caused by line breakage and signal attenuation. Check the data scale of the electronic scale for damage. If it should be replaced in time.

4. Weighing is the number displayed on the display is unstable.

Solution: Check if the scale is placed in the horizontal plane and reposition it.

5. After turning on the power, the electronic scale display does not respond.

Solution: Check carefully that the power cable is intact and the monitor cable is intact. If damage is found, replace it immediately.