Screen printing in the production of banners

The production of banners is in fact the easiest way to screen projects:

1. Hand-incriminating method: Use a cutting plotter or hand-painted (requires fine arts skills) to write the graphic on white paper. - Use a utility knife to dig out the part that needs to be printed (the part that needs to be left connected) ---- Preparation Printing material, if it is a dark cloth with a paste, light-colored cloth can be used for water (special fabrics such as nylon on the fastness requirements available ink) ---- ready to frame 80-120 mesh screen (Polyester network teaching is good) ---- ready to print materials (cloth) ----- put the carved words on the fabric ----- pressure on the blank screen - into the printing material - --- The squeegee fills up and receives the printed material ----- tears off the printed paper, and so on.

2. Photographic platemaking method: If the quantity is large and the content is the same, this method can be used to coat the photosensitive adhesive on the prepared screen—a timely sticking with Feiling or computer lettering on the good plastic mesh. On the board - with projection drying board drying board (usually in the 4 meters * 0. 9 meters around the net) ---- washing development ----- printing.
3, adhesive method: use computer lettering in a timely manner affixed to the screen board, used directly for printing, (the key to pay attention to the timely sticky viscosity is not easy to use treatment, can be used to make the heat after the hair dryer compactor Add some glue or other methods to the strokes.

4, thermal transfer method: Now in many parts of the country a more popular method of production, features: feel good, fastness, no drying, no pollution, but the cost is slightly higher, with silk screen or offset color paper (or The ready-made single-colored paper is carved on the cloth, and after it is pressed on the printing cloth for more than 180 seconds, the graphic text is firmly printed on the cloth and becomes a banner.