Now with the improvement of living standards, many people have improved their living conditions. When they are in new houses, they will use plastic-steel windows. Everyone knows what kind of things are not always bad. They all need maintenance. Then everyone Do you know how to repair plastic-steel windows? Many people don't know it! Today, Xiaobian will take a look at the methods and precautions for repairing plastic-steel windows !
Repair plastic window method:
1. The air leakage between the window frame and the wall leaks from the window frame and the wall. Generally, there is floating ash at the intersection of the indoor side window frame and the wall surface. The more obvious the leakage is more serious. This requires glue to seal. If the gap is large, it needs to be filled with styrofoam first, then sealant. It is recommended to choose "Neutral Silicone Sealant" or "Neutral Silicone Weather Resistant Adhesive".
2, hardware lock is not strict, resulting in air leakage, if the hardware installation is not in place, or after some time, the lock is not strict due to some reasons, you need to adjust the hardware to achieve a good locking effect, if it is serious, may need Replace some hardware accessories.
3, sash deformation caused by air leakage due to plastic material will have a deflection, so the longer the single rod, the amount of deformation may be greater, so the leakage caused by sash deformation in our maintenance is not a few, for deformation The window sash, if it is not serious, may be corrected by adding an intermediate lock; if the deformation is severe to a certain extent, it may be necessary to change the window sash.
4. The leakage of the window sash is the same as that of the flood control. It is necessary to adopt “sparse†rather than “blockingâ€, and use rubber strips or tops to “blockâ€, which can only make the deformation of the sash more serious.
5, the window fan off the corner caused by air leakage due to the sash hollow glass weight is very large, if the installation is not properly padded, it will cause the window fan to fall off. For less serious corners, you can reset by adjusting the hardware. If the corner is serious, you need to remove the glass and re-glass.
6. Leakage at the butt joint of the bead is in maintenance. Many customers will report the leakage at the opposite corner of the bead. In fact, in the plastic window, each window frame has a drainage system, and the outer drainage hole is the cavity with the insulating glass. When the body is connected, the cold air will enter the glass cavity along the drainage hole. If the diagonal of the bead is not strict or the strip is missing, it will feel the air leakage, as long as the sealant is sealed at the opposite corner of the bead.
Precautions for repairing plastic steel windows:
1. When the window is installed, the surface protective film of the profile should be peeled off and scrubbed clean; otherwise, the adhesive of the protective film will remain on the profile, clay, sticky ash, extremely unattractive, and difficult to be cleaned again. clean.
2. When the wind is blowing, the casement window sash should be closed in time.
3. Do not hang heavy objects on the window hardware.
4. Open the lower hanging window to achieve different opening by changing the direction of the handle opening, to understand how to operate, so as not to cause damage.
5. When using the sliding window, the sliding rail should be cleaned frequently to keep it clean so that there are no hard particles in the track surface and the groove.
6. Plastic steel window products are equipped with drainage and decompression systems in the window frame, window sash, etc. to ensure the airtight performance and watertight performance of the doors and windows. When using the user, do not block the drainage holes and air pressure balance holes of the doors and windows. In order to avoid the drainage performance of doors and windows, the rain in the snow and rain will cause infiltration, which will bring inconvenience to daily life and work.
Many people in life press the plastic-steel window at home, but when there is a problem with the window, do you know how to deal with it? The above article is about the method and precautions for the maintenance of plastic-steel windows. Xiaobian said Where is not clear, if you want to know more about the decoration information, please continue to pay attention to the decoration home network.
More related wonderful reading:
Maintenance method of plastic steel window method for repairing plastic steel window
Deep Fryer,Stainless Turkey Fryer,Elite Platinum Deep Fryer,Stainless Deep Fryer
Jiangmen Junerte Stainless Steel Kitchenware Co.,Ltd , https://www.jmjetkitchenware.com