[ Chinese wardrobe network ] [Chinese wardrobe network ] We always hope to buy a solid and affordable solid wood wardrobe , but this requires skill, which can not be ignored when selecting details, then Qumei solid wood wardrobe What are the details to choose?
Qumei solid wood wardrobe selection details one
First look at the selection of the wardrobe
Professional manufacturers use environmentally-friendly plates that meet national testing standards, and some manufacturers use inferior plates that have no test reports and pose a potential threat to human health. Therefore, to buy a wardrobe, we must first look at whether the merchant has a plate inspection report and relevant testing certificate from the national authority inspection department.
Qumei solid wood wardrobe selection details two
Look at the veneer
Some wardrobes look good on the surface, but with a light stroke on the nails, there will be noticeable scratches. These wardrobes are often made of surface-coated vellum paper or ornate paper sheets with poor abrasion resistance. The professional manufacturer uses the environmentally friendly melamine veneer with thicker immersion paint and high temperature and high pressure treatment, which has high surface strength, abrasion resistance and scratch resistance.
Qumei solid wood wardrobe selection details three
Look at the edge of the board
Professional manufacturers use precision panel saws to cut sheets, and there is no chipping around the sheets. After sealing around, it can effectively prevent the moisture in the air from invading the inside of the board. Some manufacturers have no professional equipment, not only the rough cutting, but also the obvious edge collapse. Others even cut corners and only sealed the front side of the board. The remaining unsealed surface absorbs moisture from the air, causing the sheet to swell, causing the wardrobe to deform and affecting its service life.
Qumei solid wood wardrobe selection details four
Look at the backplane structure
Professional manufacturers use a backing plate with a thickness of 5mm or more, melamine veneer to prevent the back plate from directly contacting the wall to absorb moisture on the wall. The mainstream custom wardrobe brands on the market are all connected by nail-type backplanes, which are not easily damp, moldy and deformed.
Qumei solid wood wardrobe selection details five
Look at hardware accessories
Professional manufacturers use famous factory accessories, quality assurance. Accessories are often hidden, consumers are difficult to identify, and you have to carefully push and pull. Accessories are an important element of wardrobes, bookcases and sliding doors, and are important indicators for ensuring the comfort and durability of household products.
AUTRENDS INTERNATIONAL LIMITED , https://www.petspetstoys.com