step:
The first step: the beeswax is placed in a metal container and heated to melt into a liquid.
Step 2: Use a two-pronged (or three-pronged) brush to place the beeswax on the furniture like a star (should be done side by side).
The third step: hot wax.
Use electric bow heating, hand-held electric bow heating must be constantly moving, and use a large brush to evenly brush the wax to all parts, the electric bow will move with it. Be careful not to burn your skin. This step is the most important. If the (new) furniture moisture content is high, the heating must be gradual, not too hot, so that the wax gradually penetrates into the inner layer of wood. When the wax is evenly blistered and no longer continues to penetrate into the inner layer of the wood.
The fourth step: waxing.
Use a wax driver to smash the floating wax that remains on the surface of the furniture until the hand touches it and feels it is not sticky.
Step 5: Wipe the wax.
Wipe it with a cotton cloth like a bath, until it is rubbed, and it feels good when it is lubricated.
Follow the steps above to complete the first maintenance, then wipe and touch with cotton cloth and hands. After 3 months and half a year, the waxing was carried out according to the above method, but the amount of wax was reduced once and for all. Don't throw away the cotton cloth, and use it to wipe the furniture continuously.
Note: When the new furniture is waxed for the first time, the interior of the furniture does not need to be waxed, so that the inner surface of the wood can exchange moisture with the air freely; if the new furniture is better dried, the back of the dough can be thinned. Wax, so that the furniture generally does not break during use; the second time the third time, the interior of the furniture can be thinned with a layer of wax.
Bike Bag,Handlebar Bag,Cycling Backpack,Bike Saddle Bag
Ningbo Fineweather International Trade Co., Ltd. , https://www.nbfwsbag.com