[ Chinese wardrobe net ] When purchasing in the closet , you need to be careful that the low-end products are shoddy. The surface oil is smooth and bright. In fact, a layer of paint film is applied on the substrate, and the properties are related to melamine. Compared with the obvious difference, most of these products are produced in informal workshops. Many of the products produced by these small workshops are unqualified, and there are roughly the following major problems:
The door panel is not thick enough to ignore the safety hazard of the glass
The thickness of the door panel should be 9 PCT to be easily deformed. The standard thickness of the glass should be 5 cm, but if the decorative piece is clamped with two layers of glass, such as weaving, rattan, etc., since the glass groove is only 9 cm wide, the glass is too thin, and it is easy to leave a safety hazard.
Cabinet
The body material is shoddy, confusing the name, and pretending to be the original brand product with non-original products.
Metal frame is difficult to distinguish, stealing materials
The metal frame of the closet door, the door frame has two kinds of carbon steel and aluminum. Carbon steel is easy to rust, and the rear hanging door wheel will be exposed. Currently, aluminum is the mainstream. Aluminum materials include aluminum-magnesium alloys, aluminum-titanium alloys, and the like. Titanium has high strength, small specific gravity and high price, but consumers cannot distinguish it from the surface. In fact, even aluminum-titanium alloys have the problem of high titanium content. In general, with the fingers, the aluminum-titanium alloy sounds crisp and the metal feels stronger.
Door wheel smearing oil, exaggerating service life
Door wheel, ordinary door wheel shell is electroplated, easy to rust, the wheel is made of ordinary engineering plastic, easy to wear high-grade door wheel is stainless steel shell, the wheel is made of carbon fiberglass (international new high-tech material), under the load of 180 kg Can push and pull more than 100,000 times.
Advanced Vacuum Dough Kneading Technology
Vacuum Dough Kneader/Vacuum Kneader:
This machine developed by our company is the most advanced domestic kneading machine. It is mainly applicable for making various flour products. Its mixing leaves can be adjusted according to the characteristic of wheat flour. Many mixing leaves developed by our company have been granted the national patents. This vacuum kneading machine is under the vacuum condition imitating the manually kneading to quickly form the gluten and proportionate the protein structure. The kneaded dough has better extension and elasticity, more smooth surface, and better looking than any others.
With human-machine interface and PLC control, the machine has high automation level and is convenient to operate. After inputing the process procedure, the machine will complete the whole kneading process automatically. Also it can be manually controlled to satisfy different demands of production.Flour Mixer,Mixing Machine For Baking,Flour Mixing Machine,Bread Dough Mixer,Vacuum Dough Kneader,Vacuum Kneader
Helper Machinery Group Co., Ltd. , https://www.helperfoodmachiney.com