Blood lysing instrument / new multifunctional solvating machine
Precautions:
1. Normally set the water temperature, it can be turned on for a long time. When the time is used, the swing switch will be turned on, the frequency will be set, and the swing will be automatically turned off. When the swing switch is turned off, the power consumption is saved and the mechanical wear is reduced.
2. Be sure to add water to the water line before use. Do not dry it to protect the heating tube. As the boot time continues to increase, the water in the tank gradually evaporates. Please check the water level at any time (add water to water). Make sure the machine is working properly.
3. Set the temperature: Press the SET button to set or view the temperature set point. Press the SET button to start flashing, indicating that the meter enters the setting state, press the â–³ key to increase the value, press the â–³ or â–½ key to change the data quickly, press the SET button again to return to the normal working state. , the heating indicator lights up.
4. Set in advance: Press the SET button for 3 seconds to enter the inner parameter setting state. The first parameter that appears and flashes is the amount of advance that is stopped. The parameter of advance quantity should be carefully adjusted. To reduce the temperature overshoot, the instrument will control the heating output to cut off the heating in advance, and start heating when the temperature falls below the advance amount. Output (relay) does not work within the set value and advance amount range, which reduces the number of relay actions to extend the life of the relay. Example: If the set value is 50.0 ° C, the advance amount is 0.5, the relay is released when the meter is heated to 49.5.0, and the relay is closed when the temperature drops to 50.0 ° C - 0.5 ° C = 49.5 ° C. The greater the amount of advance, the fewer the number of relay actions, and the advance amount is reduced to reduce the control accuracy. After adjusting the advance parameter, press the SET button for 3 seconds to return to the working state. (Note: The advance setting is specially set to prevent the temperature from being too high after the heating is stopped, and generally does not need to be modified).
Beijing Heng Aode Instrument Co., Ltd.
Contact: Wang Rui (Ms.)
private label Hair care conditioner ,30 years experience guangzhou cosmetics factory supply ,OEM/ODM service is welcomed .
Guangzhou Athena Cosmetics Manufacturing Co.,Ltd is a subsidiary of YALAN international group which is located in Guangzhou,china.it is the production center of YALAN international group branding products,specialized in the development and production if cosmetics.ATHENA is qualified for import and export.
controls the quality in full accordance with GMP, ISO9001 quality system good manufacturing practice for cosmetics and key points of cosmetic production licence inspection.
hair conditioner,hair growth shampoo and conditioner private label,curly hair shampoo and conditioner,conditioner hair
Athena(Guangzhou) Cosmetics Manufacturer Co., Ltd , https://www.gzathenaskincare.com