In recent years, with the rapid development of the home improvement industry, the home decoration heat has also been driven. The choice of lighting is becoming wider and wider, and more and more families like to use the hot ceiling lamps as decoration. Let's take a look at the details of the installation and use of the ceiling lamp !
Ceiling light
First, the ceiling lamp installation preparation tool
1. Electric drill or electric hammer
Punch holes in the pouring floor. Generally, the electric drill can be used. For the ceiling electric drill with relatively strong concrete structure, the electric hammer is needed, and the electric hammer is relatively heavy. The principle is that it can be used without electric hammer.
2, large Phillips screwdriver, small Phillips screwdriver
3, electrical insulation tape
4, stripping pliers
5, pencil
6, expansion screws (generally buy lights come with)
Second, the attention of the ceiling lamp in the installation and use
1. When installing the ceiling lamp in the masonry structure, use the embedded bolts or fix them with expansion bolts, nylon plugs or plastic plugs; do not use wooden wedges. And the bearing capacity of the above fixing member should match the weight of the ceiling lamp. To ensure that the ceiling lamp is fixed, reliable and can extend its service life.
Ceiling light installation
2. When fixing with expansion bolts, the bolt specifications should be selected according to the technical requirements of the product. The drilling diameter and the buried depth should be consistent with the bolt specifications.
3. The number of fixed lamp holder bolts should not be less than the number of fixing holes on the base of the lamp, and the bolt diameter should match the hole diameter; the lamp with no fixed mounting hole on the base (self-punching during installation), each lamp is used for fixing The number of bolts or screws should not be less than 2, and the center of gravity of the lamp should match the center of gravity of the bolt or screw; only when the diameter of the insulation table is 75mm or less, it can be fixed by one bolt or screw.
4, ceiling lamps can not be directly installed on flammable objects, some families in order to beautifully use the paint behind the three plywood lining behind the ceiling lamp, in fact, this is very dangerous, must take insulation measures; if the surface of the lamp is near high temperature Insulation or heat dissipation measures should also be taken.
5. The ceiling lamp should also be inspected before installation: 1) The cross section of the wire core leading to each lamp, the copper core cord is not less than 0.4 mm 2 , and the copper core is not less than 0.5 mm 2 , otherwise the lead must be replaced. 2) The connection between the wire and the lamp cap, the connection of the parallel wires between the lamp caps should be firm, and the electrical contact should be good, so as to avoid sparks between the wires and the terminals due to poor contact, and danger occurs.
6. Ceiling lamps equipped with incandescent bulbs, the bulb should not be close to the lampshade; the power of the bulb should also be selected according to the technical requirements of the product, not too large, to avoid the bulb temperature being too high, and the glass cover is broken and then splashed down.
Precautions for installation and use of ceiling lamps
7. The two wire ends connected to the ceiling of the ceiling lamp power supply should have good electrical contact. They should be wrapped with black rubber tape and kept at a certain distance. If possible, do not put the two wire ends under the same piece of metal. In order to avoid short circuit, danger occurs.
The above is the knowledge about the installation and use of the ceiling lamp for your shared sharing of the ceiling light, I hope to help you. If you want to know more about the installation of ceiling lamps, please continue to pay attention to the net. Get a quote for 10 seconds and get four sets of design solutions for free. You can also follow the whole process of decorating the housekeeper and take action!
Pvc Binder,Eco Friendly Pvc Binder,Customized Pvc Binder,Colorful Pvc Binder
TAISHAN JINRI STATIONERY PLASTIC CO.,LTD , https://www.jinri-folder.com