Clean energy dress up beautiful countryside

In recent years, China has been developing clean energy. By promoting the transformation and upgrading of rural production and living energy structure and the development of ecological recycling agriculture according to local conditions, China's rural economy has achieved green, low-carbon and circular development, and realized three economic, social and environmental benefits. The perfect unity.

"Warm baby" on the roof

"I have been working on carbon fiber for more than two years. It was particularly troublesome to burn the stove before, but the air is not good. Now, before the children go home, give a letter and plug in the electricity to warm up. Relatives and friends around. At first glance, the effect was quite good, and many of them were installed.” Li Fuhai, a villager from Beichengzi Village, Yinan County, Tangshan, Hebei.

Photovoltaic power generation + carbon fiber heating refers to the roof resource that is idle and idle. The photovoltaic module is used to convert solar energy into electric energy, and then the carbon fiber electric heater converts electric energy into heat energy. Through intelligent temperature control setting, zero emission and zero pollution heating are realized. .

This new type of heating can not only benefit from the photovoltaic power generation, but also subsidize the higher heating cost of the carbon fiber heater, reduce the power transmission distance, solve the problem of power loss in the process of boosting and long-distance transportation, and effectively improve the renewable capacity. Energy utilization. The county has realized the unified heating of coal to electricity for 177 scattered coal-fired boiler heating units. After treatment, it can reduce coal burning by about 18,000 tons per year, reduce emissions of 437 tons of soot, 54 tons of sulfur dioxide and 88 tons of nitrogen oxides. The annual income of investment companies can reach 3.9 million.

Windmill on the mountain

Following the rushing waters of the Jinsha River, we came to Chongxi Town, Qiaojia County, Yunnan Province. Looking into the distance, the green hills, the cattle and sheep in groups, under the blue sky and white clouds, the rotating wind turbines such as the majestic soldiers stand on the Lai Shishan at an altitude of 3,100 meters. The giant wind blades are like open wings, turning in the wind, turning rich wind energy into clean electric energy, and continuously sending them to thousands of households.

In 2017 alone, the power generation capacity of the Lashishan Wind Farm reached 394.49 billion kWh, and the average utilization time of the wind farm was 2,532 hours. In order to make full use of the abundant wind resources in the area, the county has developed wind power projects and has invested in six wind farms including Xinchanggou Wind Farm and Sanshui Water Wind Farm.

Clean and environmentally friendly wind power not only injects a steady stream of green power into the local economic development, but also adds a beautiful new landscape to Lai Shishan. Windmills, green hills, cattle and sheep are against each other, and they are beautiful, attracting many people from the city to come and enjoy.

This article is posted on the website for the purpose of transmitting more information and does not imply endorsement of its views or confirmation of its description.

Article source address: http://

Electric Patient Lift

The electric patient lift realizes the safe transfer of paralyzed or injured patients or the elderly between beds, wheelchairs, seats, and toilets, which greatly reduces the work intensity of nursing staff, improves nursing efficiency, and reduces nursing risks. It can solve the movement, weighing and positioning control of the DPS patient's body position for the elderly, the disabled, the paralyzed patients, and the bedridden patients.


Features of medical Transfer Patient Lift
The caster legs can be adjusted arbitrarily within the range of 0°-38°, which is suitable for the angular needs of various wheelchairs, seats, toilets and hospital beds.
The height between the pillar and the lifting rod of the electric lift can be adjusted as needed (adjustment distance 0mm-50mm-100mm), and it can be lifted from the ground to a suitable position.
The electric lift has a safety emergency stop device.
During the lifting process, the patient can rotate 360° arbitrarily in order to obtain the best posture during transfer.
The push handle of the electric lift conforms to the principle of dynamics, which is convenient for pushing forward and backward or moving and rotating sideways.
The rear wheel is equipped with a brake device to prevent the lift from sliding when the patient is lifted, causing unreasonable injury to the nursing staff or the patient.

Electric Patient Lift,Patient Lift Hoist,Electric Mobile Patient Lift,Electric Sit To Stand Lift

Jiangmen Jia Mei Medical Products Co.,Ltd. , https://www.jmjiameimedical.com